썬더레이저에 오신것을 환영합니다

Sales Email: dmtsales@davids.co.kr
Telephone: 032-508-1210

materials materials

Location:Home >materials


  • Laser marking and laser engraving of anodized aluminium

    Laser marking and laser engraving of anodized aluminium

    Release Time:2016/06/08Browsing Times:775

    Pictures and inscriptions that are accurate down to the last detail on anodized coatings •The protective oxide layer is not pierced through •High contrast values can be achieved •Extremely fine con...

  • wood

    wood

    Release Time:2016/05/12Browsing Times:3983

    You don’t have to spend money on purchasing more new endmills or spend time on polishing them again.Since you have a Thunder Laser Cutter. Our laser cutter will make your working procedure easier a...

  • Fabric and Leather

    Fabric and Leather

    Release Time:2016/05/12Browsing Times:3273

    As a new processing method, laser cutting and engraving has many advantages such as high precision, fast application, stable quality, material saving, good reliability etc. Nowadays, it’s becoming ...

  • 대나무

    대나무

    Release Time:2016/05/12Browsing Times:1334

    썬더레이저의 co2 레이저 조각기는 대나무 조각에 매우 적합합니다. 썬더레이저의 co2 레이저 조각기를 사용하면, 여러분은 그림, 단어, 그리고 로고를 대나무 물체에 새길 수 있습니다. 그 조각 속도는 빠르고 ...

  • Metal

    Metal

    Release Time:2016/05/12Browsing Times:1555

    Thunder Laser engraving machine is very good for engraving images on painted metal such as coated metal and anodized aluminum. The laser engraving machine is widely used for marking and labeling on...

  • 아크릴

    아크릴

    Release Time:2016/05/12Browsing Times:4762

    썬더레이저의 Co2 레이저 컷팅기는 Co2레이저 튜브를 사용하므로 아크릴 섬유를 능숙하게 다룰 수 있습니다. 아크릴 레이저를 사용하여 사진과 이미지를 아크릴로 새길 수도 있고 아크릴로도 표기할 수 있습니다....

  • Glass

    Glass

    Release Time:2016/05/12Browsing Times:3468

    Thunder laser engraver also specializes in engraving and etching photos and images on glass. The co2 laser engraver used the non-contact engraving process with the very fast engraving speed. And it...

  • Foam

    Foam

    Release Time:2016/05/12Browsing Times:1131

    Thunder laser cutter is very suitable to cut foam materials. As it cuts in a non-contact way, so there will not have damage or deformation on the foam. And the heat of co2 laser will seal the edge ...