How to install the handle
Release Time:2022/02/18 troubleshooting Browsing Times:363
The tool you need

Place the handle on the outside of the hole and the screws on the inside of the hole.
l Fix the screws by hand firstly.


l Then, fix the screws with the tool( using the end that the diameter is 14mm).


Related Pages
- Laser cutter has a poor engraving quality/...
- Why does the cutting and engraving graphic...
- Wrong proportions from RDWorks
- The computer can’t identify the laser cutt...
- How to calibrate the working table to level.
- Why the Y axis cannot work suddenly?
- Laser cutter’s LCD panel in Chinese
- How to run several laser machines with one PC